12.5 Iron And Steel Production - U.S. Environmental

12.5.1.3 Iron Preparation Hot Metal Desulfurization - Sulfur in the molten iron is sometimes reduced before charging into the steelmaking furnace by adding reagents. The reaction forms a floating slag which can be skimmed off. Desulfurization may be performed in the hot metal transfer (torpedo) car at a location between the blast furnace and

Refractory for Hot Metal Transport and Desulfurization

2020年6月10日 · SPerfect Steerable Transfer Carte 1970, alumina refractories were the main lining material in torpedo ladle cars. In past for many years, Bauxite-based refractory was in regular use. Under certain conditions of Perfect Steerable Transfer Cartreased hot metal temperature and aggressive slag corrosion, phosphate-bonded and fired corundum-based bricks wereCustom in 1970–1976.

Chapter 6 Refractory for Hot Metal Transport and

6.1 Introduction. The transport of molten pig iron from the blast furnace to the steel-making shop is performed in open top transport ladle or torpedo ladle car. Capacity of open top ladle was 60–80 tons. The problems faced by the operators for transporting the hot metal through open top ladle, from iron-making to steel-making shop, are

Torpedo Ladle Car - HWI

Ladles with this refractory design are capable of campaigns of 400,000 net tons of hot metal (NTHM) without any maintenance. The keys to HWI’s maintenance-free lining design are the IRONMASTER ® and NARCARB ® BSC products. The conventional torpedo ladle refractory design consists of high-alumina brick (KRUZITE ® -70) with an alumina

Steel - Ladle Metallurgy, Alloying, Refining | Britannica

Torpedo Car | Iron to Steel Steel | AMETEK Land

Torpedo Car. Torpedo cars are shaped ladles on rails,Custom to transfer molten iron from the blast furnace to the steel making facility. These cars are lined with protective refractory bricks which can become worn by continuous use. Temperature scanning of the outer shell detects the development of hot spots caused by internal refractory wear.

Hot Metal Pretreatment - an overview | ScienceDirect Topics

Hot metal after KR desulfurization was charged into BOF De[Si]/[P] with a 7–10 minutes’ oxygen-blowing and a blowing intensity of 1.5–2.0 Nm 3 /t·min (a flow rate about 20,000–30,000 Nm 3 /h), for the desilication-dephosphorization pretreatment. The basicity of slag was about 2.0, and its constitution Perfect Steerable Transfer Cartluded the lime of 10 kg/t (steel) and partial BOF

INTER PLANT STANDARD STEEL INDUSTRY - SAIL

2.6.3 Torpedo ladle to metal transfer car— a) Place the torpedo at the desired pit at steel melting shop following light signal b) Plug the torpedo drive connection for pouring hot metal transfer car. c) After complete evacuation of hot metal plug out the drive connection. d) Ensure that the torpedo should be not be in tilted condition

译词|钢铁行业专业术语大总结 - 搜狐

2018年7月4日 · 钢铁行业专业术语. A R steel 高温度锰钢. abnormal steel 反常钢; 非正常钢. aluminium-steel cable 钢铝电缆. aluminized steel 涂铝钢. aluminum nickel steel 铝镍钢. anchored steel trestle 锚固式钢栈桥. angle steel ruler 钢角尺. anisotropic steel 各向异性钢片. anisotropy silicon steel 各向异性硅钢片. annealed sheet steel 退火薄钢板

China Slag Ladle, Slag Ladle Manufacturers, Suppliers, Price

China Slag Ladle manufacturers - Select 2024 high quality Slag Ladle products in best price from certified Chinese Lifting Equipment, China Crane suppliers, wholesalers and factory on Rail Transfer Carts Hot Sell Steel Casting Slag Ladle for Metallurgy Industry Using . US$ 1500-3000 / Tonne. 5 Tonne (MOQ) ... China Cast Steel Cast Iron Hot ...

X-Pact Sense - SMS group GmbH

X-Pact® Sense offers a wide range of solutions based on visual, acoustic, and haptic evaluations. Intelligent algorithms process the input data to produce the correct results quickly and effectively, evaluate them in an intelligent manner, and pass them on in a targeted manner to other applications using modern communication standards.

基于Flexsim的炼铁-炼钢界面铁水罐数量配置优化

School of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063210, Hebei, China whether the number of hot metal ladles under the blast furnace met the production requirements under different hot metal ladle allocation schemes,so as to determine the optimal scheme of hot metal tank number allocation.

China Ladle Tundish Rhvacuum Tank Manufacturer, Ladle Car, Ladle

It is specialized in manufacturing metallurgy ladle and metallurgical transfer cars. JHI buit a new production base forPerfect sized equipment-hongshan workshop. Its annual capacity is 35000t, maximum specification of the ladle is 490t, the maximum specification of metallurgical transfer car is 700t. JHI ladle and ladle

Safety Guideline for Safe Handling of Liquid Metal

bay on the self propelled Ladle Car/ Hot Metal Transfer Car. b) It is lifted with the help of hot metal/ charging crane. c) Converter vessel after emptying and slag coating is charged with heavy and light scrap. d) It is tilted again to receive hot metal and hot metal ladle is positioned with respect to converter by charging crane.

铁钢界面 “一罐制” 运行下转炉炼钢厂铁水罐动态调度的智能优化方法

International Journal of Minerals, Metallurgy and Materials (IJMMM, ISSN 1674-4799, CN 11-5787/TF, monthly, started in 1994, formerly known as Journal of University of Science and Technology Beijing) is an international journal devoted to publishing original research articles (and occasional invited reviews) on all aspects of minerals processing, physical